Anchor Systems

Hilti’s solutions, products, software and services for fastenings

Whether you are fixing a small handrail or fastening a façade onto one of the world’s tallest skyscrapers - then at Hilti we offer a wide range of anchor systems to help.

We have more than 60 years’ experience developing anchors and fastenings. We also offer back up services to help with design, training, onsite testing and consultation - worldwide.

We’ve designed particularly robust and specialist products, such as:

Our Hilti anchor systems with Hilti SafeSet Technology – which self cleans or eliminates the need for cleaning holes almost entirely.

Our Hilti HAC – a new generation of cast-in anchor system with an innovative V-form helping to prevent voids and air pockets.

Our Hilti PROFIS Engineering and Anchor – code compliant to make your fastening design easier and quicker.

For more information, contact your local Hilti team for more information. We’re always happy to help onsite, online or on the phone.

WE DESIGN PRODUCTS THAT HELP MITIGATE THE ADVERSE CONDITIONS THAT IMPACT PERFORMANCE OF ADHESIVE ANCHORS

Temperature

Adhesives should perform in a wide range of temperatures with reasonable work and cure times.

Two-part adhesive anchors cure due to a chemical reaction between the hardener and the resin. This reaction will accelerate or decelerate depending on the temperature of the base material.

Cure times, work times, and conditioning steps that vary with temperature should be referenced in the Manufacturer’s Printed Installation Instructions (MPII). Base material temperature and adhesive anchor systems may impact a project in the following four ways:


The range of base material temperatures at the time of installation

The time required for the adhesive anchor to cure (cure time)

The time permitted to install an adhesive   anchor (working time or gel time)

Conditioning requirements of the adhesive cartridge

Hole drilling and cleaning

Simple installation methods help result in reliable performance

Hilti’s SafeSet System was developed to help simplify the hole cleaning steps by using either:


1.A hollow-drill bit and vacuum system that removes dust and debris during the drilling process

2.A proprietary anchor element, such as a Hilti HIT-Z rod, which requires no hole cleaning prior to install  

Moisture condition

Wet concrete shouldn’t inhibit work in the office or on the jobsite

When adhesives are installed into the base material holes, they form a bond with the base material to transfer load from the anchor element. The presence of water can affect adhesion to the base material.

Anchors can be tested to varying moisture conditions, including dry concrete, water-saturated concrete, water-filled concrete, and submerged concrete. Each product’s ICC-ES report includes ɸ -factors derived from testing in these conditions.

While adhesive anchor systems are generally more sensitive to increased adverse conditions, some perform reliably regardless of whether the base material meets the definition of dry concrete – that’s concrete that has not been exposed to moisture for at least 14 days. Whether your design assumes dry or water-saturated concrete, Hilti helps ensure your adhesive anchors perform reliably and reduce reliance on ideal jobsite conditions by maintaining the same ɸ-factor for both dry and water-saturated moisture conditions.

More about engineering

Profis Engineering Suite – Coming Soon

Tackle all your anchor design projects with minimal effort and maximum accuracy.

More info
Profis Anchor Software

Hilti PROFIS Anchor designs a wide range of applications for anchoring in concrete and masonry.

More info
BIM/CAD library

More efficiently model and visualize your BIM and CAD designs with the Hilti BIM/CAD Library.

More info